Nowadays, many places are developing the breeding industry, such as raising cattle, raising sheep, and also aquatic product breeding. Large-scale breeding is generally applied to feed mixers, which can reduce manpower. Then how should gramin feed mixer for farm be used?
1. Before using the gramin feed mixer for farm, you must turn the motor rotor vigorously to repair whether the claw, hammer type, and its motor rotor are flexible and firm, whether there is a collision in the shell, and whether the switching direction of the motor rotor is in line with the equipment arrow The symbol refers to the same orientation.
2. The “tightening screw” of the production scheduling pressure wheel is 0.1-0.3mm between the pressure wheel and the template. Take 15kg of pellets when debugging, preferably use cold skin chaff, or 5 patties of peanut meat and 15kg of wheat husk, water pressure test, repeatedly squeeze for 15 minutes, the feed cannot be pushed in and out, clamp the feed vise in the template hole to the nail After connecting, squeeze again until everything feeds normally.
3. When the gramin feed mixer for farm is in use, the worker must bypass the tangential direction of the hammer rotation, and it is not allowed to wear gloves to feed the feed, and the hand cannot cross the anti-counterfeiting line, to block the use of copper and sticks instead of hand feeding.
4. At work, pay attention to the activity of the gramin feed mixer for farm in time, and the feed must be symmetrical to avoid blocking the car, and it is not necessary to work with high loads for a long time. If there is vibration, noise, the temperature of the rolling bearing and the fuselage is too high, or the material spraying outwards, it should be shut down and repaired immediately, and the shortcomings can be solved before it can work again.
5. For safer production, after removing the machine cover, you must first turn off the power switch and turn off the power switch of the equipment before touching the template of the pressure wheel with your hands and other objects. In addition, check the tightening of each component after the equipment is used up. If you see any marks that fall off, you should tighten it immediately, and check whether the transmission belt is tight.
6. When the gramin feed mixer for farm is used, there will sometimes be abnormal noises. Properly handle them. First, let the machinery and equipment rotate at a high speed and listen carefully to where the noise is generated. If it is an abnormal noise in the middle of the tanker, adjust the live screws in the storage tank. The second is to check whether the film is thrown away and calibrate the motor rotor.