Introduction of Small farm feed mixer:
Small farm feed mixer is one of the necessary equipment for feed processing. It can be used for feed production and processing activities of farms, farmers raising livestock, and poultry, including pet food production. It can also be used in food, chemical, pharmaceutical, pesticide, and other industries Mixing of powder, granular, flake, block, and miscellaneous materials, the composition of the mixture is evenly distributed to ensure the quality of the mixed feed.
Small farm feed mixer category:
Small farm feed mixer can be divided into double-shaft paddle mixer, single-shaft paddle mixer, single-shaft ribbon mixer, each type of mixer can also be divided into different models according to different output specifications.
Single shaft paddle mixer:
Under the working condition of the single-shaft mixer, the materials in the machine move convectively along the inner wall under the action of the high-speed rotating blades, and splash along the two sides of the blades on the other hand, so that the materials are continuously convective, diffused, and flipped. The purpose of uniform mixing is achieved in a short time.
1. Double layer rotor design, inner and outer blade double layer design to enhance material convection, shear, mixing;
2. The discharge door is fully opened, and the material is emptied instantaneously with no residue;
3. The sealing strip of the discharge door is sealed to prevent leakage and ensure that there is no leakage. The shaft end is double-sealed with sealing packing and airbag seal to ensure no leakage;
4. Super large inspection door, reasonable design, convenient for cleaning and maintenance, replacing the blades, saving time.
Double shaft paddle mixer:
Biaxial paddle mixer makes full use of the principle of convective mixing, that is, the material is thrown up in the mixer to form a flow layer, resulting in instant weight loss, so as to achieve the best mixing effect. In the field of flow layer, the material overcomes the centrifugal force at A certain circumferential speed and moves from A to B under the action of the blade with A specific Angle. At the same time, the moving blade sends it to C, and the blade with the same specific Angle sends it to D, and then back to A from D. In addition, under the action of specific overlapping blades, the material moves in the axial direction, realizing the mixing in the full range and forming the random optimal motion state.
Single shaft ribbon mixer:
1. The mixing uniformity is high, and the material residue in the machine is small.
2. According to the needs of users, the door can be opened with a large or small opening, pneumatic, electric, or manual opening and discharging.
3. The liquid adding device can be added according to the needs of users.
Main structural features of Small farm feed mixer:
1. The body is trough-shaped, and the cross-sectional shape is U-shaped
2. The casing is mostly made of ordinary carbon steel or stainless steel, the feed inlet is on the top of the body, and the full-length rectangular feed inlet
3. The screw shaft is inside the machine body, and the spiral is distributed with two ends, with less residue in the machine, reducing feed cross-contamination and improving product quality.
4. The discharge port is located in the lower part of the machine body, which is controlled by machinery and pneumatics. The full-length large-opening discharge port facilitates the rapid discharge of materials in the mixer.
5. The transmission part is composed of a motor, a reducer, and a coupling. The reducer directly drives the screw shaft through the coupling