Introduction of SCQZ series powder cleaning sieve:
SCQZ series powder cleaning sieve is mainly used for the cleaning of powdered raw materials such as milk rice bran, bran, and fish meal in feed mills. Materials can pass through other equipment smoothly. The machine can also be used for sieving, crushing, and cleaning the mixed materials to ensure the quality of the compound feed.
The Structure of the SCQZ series powder cleaning sieve:
SCQZ series powder cleaning sieve is mainly composed of sieve body, rotor, sieve simple, and transmission device.
SCQZ series powder cleaning sieve main components:
1. Screen body, including feed hopper, screen, operating door, discharge port and cover end, and other parts. There is an inspection hole on the side of the feeding hopper so that the working condition of the feeding screw can be checked at any time. It can also be cleaned up if necessary.
2. Rotor. The rotor is composed of a beater plate and brush, bracket, main shaft, and unfinished screw. The main shaft is a long optical axis, a bracket is installed on the shaft, and the end of the bracket is equipped with a punching plate and a cleaning brush, and is installed at a certain inclination angle with the main shaft. The gap between the punching plate, the brush, and the screen can be adjusted by adjusting the bolts. The feeding screw is installed on one end of the main shaft through a flat key and rotates with the main shaft.
3. Sieve cylinder. On the fixed ring of the box where the two punched sieve plates are installed, the sieve plates are provided with beading bars and bolts to form a conical sieve cylinder. transmission. Including motor, V-belt pulley, protective cover, etc. The motor has four bolts hanging below the feed hopper, and the tension of the V-belt can be adjusted by dropping the hanging bolts.
Working principle of SCQZ series powder cleaning sieve:
SCQZ series powder cleaning sieve works continuously, the powder is forced into the sieve by the feeding screw, the powder is crushed by the impact of the beating plate, and the powder is simultaneously pushed by the beating plate and beaten by the beating plate. The plates together make a circular motion around the inner surface of the screen drum. Under the action of the pressure of the bearing plate and the centrifugal force of the material, the powder smaller than the sieve hole quickly passes through the sieve hole and is discharged from the discharge port, and the impurities become the material on the sieve and move to the direction of the impurity outlet under the action of the inclined plate. discharge.
Features of SCQZ series powder cleaning sieve:
1. It is used for the initial cleaning of powder materials, effectively crushing large impurities such as agglomerates and separating stones in powder materials. The machine is also used for sieving mixed materials and cleaning up lumps.
2. It has the characteristics of high output, good cleaning effect, low power consumption, simple structure, and small footprint.
3. The equipment has an inspection door, which is convenient for daily maintenance, repair, and replacement of the screen cylinder.
4. Appropriate sieve holes can be selected according to the nature of the material to achieve the best separation effect.
The advantage of the SCQZ series powder cleaning sieve:
1. Impurity removal object: SCQZ series powder cleaning sieve is used for the impurity removal of powdery raw materials such as bran, rice bran, fish meal, and other powdery ingredients, such as straw scales, paper chips, stones, aggregates, and other impurities.
⒉Sieve cylinder: SCQZ series powder cleaning sieve, on the fixed ring of the box installed with two punched sieve plates, the sieve plate has beaded bars and bolts to form a conical sieve cylinder.
3. Components and names: SCQZ series powder cleaning sieve is mainly composed of sieve body, rotor, sieve drum, and transmission device. Screen body, including feeding hopper, screen barrel, operating door, discharge port and cover end, and other parts. The rotor consists of a plate and brush, a bracket, the main shaft, and a feeding screw.
4. Air suction capacity: SCQZ series powder cleaning sieve is used for impurity removal of powder, and its suction air volume is 300~700m/h. The suction air volume of the cylinder’s initial cleaning screen is obviously larger than that of the cone powder cleaning screen.
5. Screen shape specifications: The screen surface of the SCQZ series powder cleaning sieve is two curved sieves, the specifications are φ600×φ500×800, φ900×φ800×1100, and different mesh sizes can be selected.
6. Feeding method: SCQZ series powder cleaning sieve deals with powdered raw materials, and the material is forced into the feeding pipe by the feeding screw.
7. Moving parts: SCQZ series powder cleaning sieve, the beating plate, and the main shaft are installed at a certain inclination angle, and the powder moves circularly around the inner surface of the sieve cylinder under the pushing of the beating plate.
8. Speed: The rotor speed of the SCQZ series powder cleaning sieve is 300~400r/min.
9. How to remove impurities: In the SCQZ series powder cleaning sieve, the impurities and impurities that become the objects on the sieve are moved to the direction of the large impurities discharge port under the action of the inclined plane, and finally discharged from the impurities discharge port.
