Description of flat die pellet mill:
A flat die pellet mill is also called a flat die pellet machine, is a cone-shaped pellet mill. Make its two ends and die disc, outer ring line speed consistent, do not appear wheel and die dislocation friction, reduce resistance, reduce the loss of kinetic energy, prolong the service life of the die, which is a major difference with similar compression molding equipment.
Flat Die Pellet Mill principle:
The Flat Die Pellet Mill adopts a screw pressure regulating mechanism, and the mold clearance varies with the size and size. It is suitable for different materials to ensure the compaction effect. Its pressure wheel adopts large body groove width, pressure and wears resistance, pressure wheel adopts multiple uniform distributions, smooth operation, while increasing the pressure area, improve the production efficiency. Wood chips, straw compression molding needs a lot of pressure, in the same granulating, pressing block, road-making equipment, press wheel parts are the core of the whole equipment. The cone wheel flat die has the advantage of arbitrarily increasing the pressure wheel is not comparable to other equipment, such as ring model granulator due to the diameter of the ring die, the pressure wheel can not be increased, resulting in the bearing chamber of the pressure wheel becomes smaller, the assembled bearing has no strong pressure bearing capacity, bearing damage leads to the disadvantages of three stop two rest equipment. This model compression molding diversification, round rod, square, particles as long as the exchange of the mold can be done, adapt to different materials compression molding, to achieve good benefits. The granulating chamber is provided with an observation door, easy to check at any time for maintenance and repair.
Flat Die Pellet Mill Product Advantages:
1. When the pressure wheel is increased, the bearing is enlarged and the pressure bearing capacity is enhanced.
2. When the pressure wheel is enlarged, the temperature generated by extrusion friction is not easy to be transmitted to the bearing room, so as to ensure that the lubrication grease is not easy to overflow when the bearing works at low temperature.
3. When the pressure wheel is enlarged, it can be repaired 2-3 times, which prolongs the service life, reduces the production cost, and increases the profit margin of the project.
Flat Die Pellet Mill is suitable for:
Mainly suitable for coarse fiber granulation, such as wood chips, rice husk, cotton stem, cottonseed skin, weeds and other crops straw, household garbage, waste plastics and factory waste, low adhesion rate, difficulty to form the material granulation, pressure block, bar, but also suitable for biological fertilizer, organic fertilizer, compound fertilizer, and other low-temperature granulation.
Advantages of Flat die pellet mill:
1, simple structure, wide applicability, small footprint, low noise.
2, powder feed, grass meal without (or a little) liquid can be added to granulation. Therefore, the moisture content of pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage.
3. The granule made by this Flat die pellet machine has high hardness, smooth surface, and sufficient internal curing degree, which can improve the digestion and absorption of nutrients and kill general pathogenic microorganisms and parasites. It is suitable for raising rabbits, fish, ducks, and experimental animals, and can obtain higher economic benefits than the mixed powder feed.
4, This model is equipped with 1.5—- more than 20 kinds of aperture molds, which are suitable for granulating different materials to achieve the best results.
5, adapt to different materials, ensure the effect of pressing. Wood chips, corn straw, and other compression molding need a lot of pressure, in the same pelletizing equipment, the roller part is the central part of the whole equipment, and the use of high-quality alloy steel improves the service life of the roller.