TLSS Feed screw conveyor introduction:
TLSS Feed screw conveyor is a fixed sealed continuous conveying mechanical equipment. The equipment relies on the rotation of the spiral blade to push the material forward. This equipment has the characteristics of a small footprint, good sealing, no dust, low noise, simple structure, stable and reliable work, etc. It is a commonly used conveying equipment in the feed pellet production line. It can be installed on the ground or suspended and can be fed and unloaded at multiple points. It is used in food, feed, wine, and other industries.
TLSS Feed screw conveyor classification:
The conveyor can be divided into two forms: left-handed and right-handed. There are two types of cross-sections: u-shaped and round, and the circular section conveyor can also be used for vertical conveying.
The working principle of TLSS Feed screw conveyor:
TLSS Feed screw conveyor is equipment that uses the rotation of spiral blades to push bulk materials to complete the conveying. It should be conveyed horizontally or inclined (inclination angle less than 20°), and its conveying length is generally up to 40 meters. Suitable for powder, granular, or small For the transportation of bulk materials, it is not suitable to transport large pieces of corrosive, fragile, or easily bonded fibrous materials.
According to the different directions in which the spiral blades are wound on the shaft, the spiral body can be divided into two types: left-handed or right-handed. If the blade is wound on the shaft in a counterclockwise direction, it is called left-handed; if it is wound in a clockwise direction, it is called right-handed. For the same winding direction, if the rotation direction of the shaft is different, the conveying direction is also different. If the left-handed and right-handed blades are respectively wound around the two ends of a shaft, when the shaft rotates, The material can be transported from both ends to the middle or from the middle to both ends.
TLSS Feed screw conveyor features:
1. The structure is simple, the cross-sectional size is small, and the sealing performance is good;
2. It can be loaded and unloaded along the whole length;
3. It can also be conveyed in two directions in the same trough;
4. safe and convenient operation, low manufacturing cost;
5. in the process of conveying at the same time mixing and lose material role;
6. According to the user’s requirements, it can be equipped with auxiliary institutions such as cleaning doors, blocking doors,s and electrical control system.
Use and maintenance of TLSS Feed screw conveyor:
1. Lubricating oil should be added to each lubrication point before the TLSS Feed screw conveyor is turned on;
2. the middle hanging foot material is wear-resistant oil nylon, no need to be lubricated during operation, to avoid material pollution;
3. point to observe whether the rotation is correct, and determine whether the helix edge;4. It is strictly forbidden to reach out and send hard objects into the TLSS Feed screw conveyor during use to prevent the loss of
Drop off the aircraft and cause harm and injury to the person;
5. Do not remove the conveyor cover plate.
6. Regularly remove the debris wound on the spiral blade; regularly add lubricating oil to the hanging shoe;.
7. Regularly check the operation status of the reducer and replenish lubricating oil in time.