Feed mill feed pellet machine introduction:
Feed mill feed pellet machines mostly choose the SZLH series ring die feed pellet machine, because the output of feed mill is large. Feed mill feed pellet machine has high output, low consumption, mature technology, and it is widely used in domestic and foreign markets. It is an important part of the feed pellet production line.
Working principle of Feed mill feed pellet machine:
1. The material is conveyed into the modulator through the speed-regulating feeding screw auger. In order to obtain good granulation benefits (increasing output and quality), after adding hot steam for tempering, the chute-shaped feeding tube is passed through the ring die cover. With the aid of gravity and centrifugal force generated by the rotation of the ring die, the material is tightly attached to the ring die cover and the inner wall of the mold (feeding area).
2. Under the action of the drawing knife, the material is evenly and continuously fed into the wedge-shaped space (compression zone) formed by each press roller and ring die.
3. Because the gap between the working face of the outer wall of the press roll and the working face of the inner diameter of the ring die is only 0.1-0.3mm, and this gap is basically horizontal, it forms a certain extrusion pressure (extrusion zone).
4. Due to the feeding of the material, under the strong squeezing between the die and the roller, the material is compacted, squeezed into the die hole, and formed into the (forming area) in the die hole.
5. The material is continuously fed into the pressing zone, and then extruded into a shape. It is continuously extruded from the die hole, and is cut into various required particle lengths by a cutter that can adjust the distance between the knife edge and the outer wall of the ring die.
Feed mill feed pellet machine raw materials:
1. For the machine, the raw materials are corn, wheat, and other ns, and the grass is also available
2. If the raw material is powder, it can be directly made into granules
3. If the raw materials are of particle size, first, we need to crush them into powder less than 3 mm
4. There are also some requirements for the moisture of the raw materials, if it is less than 30%, it is better
5. If you want to make pellets of different sizes, you can buy several ring molds of different sizes.
Feed mill feed pellet machine structure:
1. Base 2. Magnet 3. Guide plate 4. Granulating chamber 5. Door cover 6. Main transmission box 7. Speed regulating motor 8. Reducer 9. Hopper 10. Unloading inserting door 11. Feeder 12 Conditioner 13. Conditioner reducer. 14. Conditioner motor 15. Overload protection device 16. Coupling 17. Main motor 18. Travel switch 19. Lubrication system
Feed mill feed pellet machine for sale:
Shenghong Feed mill feed pellet machine for sale has different models. SZLH250 has an hourly output of about 1 ton, SZLH320 has an hourly output of 2-4 tons, SZLH350 has an hourly output of 5-7 tons, SZLH420 has an hourly output of 8-10 tons, and SZLH508 has an hourly output of 8-10 tons. The hourly output is 15-20 tons. Feed manufacturers can choose the appropriate Feed mill feed pellet machine according to their own output.
Application scope of Feed mill feed pellet machine:
Scope of application: used to produce cattle, sheep, pigs, chickens, ducks, geese, rabbits and other animals, livestock,
and poultry feed. Such as 2-4mm diameter chicken feed particles and pig feed particles,2-5mm rabbit feed particles, 4-8mm cattle or sheep feed particles. The length of finished particles can be adjusted. It can also be used in fertilizer factory, Chinese herbal medicine, chemical industry and other pressing particles, and can be matched with a variety of powdery materials.