Description of Rough Feed Mixer:
Rough feed crushing mixer is also called cattle and sheep grass mixer, grass feed mixer, suitable for feed processing households and large, medium and small farms. The machine has reasonable design and structure, convenient maintenance, small production, and occupied space, labor and time saving, less dust, and good sealing performance.
Working principle of Rough Feed Mixer:
Mixing mechanism: put the forage into the tank, add an appropriate amount of water and feed to start mixing,
During the rotation of the roller, the tank is rotated forward for stirring, and the feed is automatically sent out in reverse, and the effect is extremely uniform and ideal.
How to use the forage mixer:
When the coarse feed crushing mixer is working, put all kinds of materials are crushed into the lower feed hopper, the cattle and sheep forage mixer is sucked into the crusher by the crusher’s high-pressure airflow to crush the materials, and the crushed materials fall into the lower mixing tank, and The mixed material must be put into the upper feed hopper. After the rotating mixing screw lifts the material to the top, the material falls freely and is lifted again by the screw. After the material is evenly mixed, pull down the unloading handle. , the material is unloaded.
Advantages of Rough Feed Mixer:
The inside of the machine is a single-shaft double-ribbon mixing material, which can make the material fully mixed and improve the mixing uniformity. The machine has the characteristics of high strength, compact structure, appearance damage, low energy consumption, long service life, and convenient operation and maintenance. With efficient and fast mixing of materials, the inner and outer spiral belts turn the material in a wide range under the movement of the spiral belt of the stirring shaft, the inner spiral belt moves the material to both sides, and the outer spiral belt moves the material from both sides to the inside. mix material back and forth.
Rough Feed Mixer Maintenance:
The installation of the mixer is based on the different angles of the cutting amount, and on the premise of ensuring that the atomized water spray will not cause the phenomenon of water spray, it really plays the role of pre-wet mixing. The angle change area of the mixing blade is 12°-21° between. The mixer is driven by double-shaft gears. When it is in normal operation, it needs to be cleaned once every shift, and lubricating grease should be injected into each bearing. Replace every 6 months
1. Cleaning Cleaning does not refer to simple cleaning, but cleaning the mechanical equipment from the inside to the outside, and cleaning the dust, sundries and dirt around the equipment. Check for oil leaks and air leaks. Then add an appropriate amount of lubricating oil to each part that needs to be lubricated.
2. Neat After cleaning, we need to tidy up and place frequently used tools and accessories. Be orderly and lay the foundation for the next work of the machine.
3. Lubrication There are three steps in the lubrication and maintenance of mechanical equipment: for small maintenance, add lubricating oil at the place where the misaligned parts are adjusted. During maintenance, it is necessary to clean and replace all the lubricating oil. The major maintenance is to disassemble the machine for a comprehensive inspection, repair the damaged parts, and restore the machine to a good state.
Rough Feed Mixer for sale:
We have many years of experience in mechanical R&D and manufacturing, integrating R&D, manufacturing, and sales. After years of continuous efforts, we have a complete and scientific quality management system. Our company’s integrity, strength, and output are recognized by the industry.