Animal feed pellet production line process:
The composition of the Animal feed pellet production line is mainly composed of the processes of entering the material, stirring the material, extruding pelletizing, driving the finished product and lubricating the system. The working process is that the raw material powder with a moisture content of not more than 15% is required to enter the feeding auger from the hopper, adjust the speed of the stepless speed regulating motor to obtain a suitable material flow, and then enter the agitator, stir with the stirring rod, and mix with steam, if necessary. Add sugar, honey or oil. It is also added from the mixing drum and tempered with steam. The amount of oil added is generally not more than 3%, otherwise it will be difficult to form. After quenching and tempering, the temperature of the cooperative powder can reach 64~85℃, and the humidity can reach 14~16%. Then, the iron impurities mixed in the powder are removed through the optional iron suction device through the chute, and then enter the pressing chamber for granulation.
Animal feed pellet production line Feeding process:
The feeding process of Animal feed pellet production line is mainly composed of speed regulating motor, reducer, auger cylinder and auger shaft. The auger plays the role of feeding, and the rotating speed is adjustable, that is, the feeding amount is variable, reaching the rated current and output. The auger shaft can be pulled out from the right end of the auger barrel for cleaning and maintenance. The cooperative feed formula has a variety of raw materials and comprehensive nutrition, which can prevent animals from choosing their favorite food from the powder and rejecting the intake of other ingredients. The speed regulating motor consists of a three-phase asynchronous communication motor, an eddy current clutch and a tachogenerator. It is used with JZT controller, its output speed can be changed by electromagnetic speed regulating motor controller.
Animal feed pellet production line reducer:
The animal feed pellet production line reducer adopts a cycloidal pinwheel reducer with a reduction ratio of 1.10, which is directly connected to the speed regulating motor to reduce the speed, so that the effective speed of the feed auger is controlled between 12 and 120 rpm.
Animal feed pellet production line process equipment:
1. Animal feed pellet production line crushing section, raw material proportioning section, pelletizing section and material transfer system for material transportation;
2. The crushing section includes a granular raw material vibrating grading screen and a pulverizer located under the granular raw material vibrating grading screen, and a granular raw material storage tank for storing granular raw materials is arranged between the granular raw material vibrating grading screen and the pulverizer;
3. The raw material proportioning section includes a counterweight section and a mixing section; the pelleting section includes a pellet mill for preparing the powder into pellets. After pelleting, a cooling section is also required to use SKLN Counterflow pellet cooler to cool the feed pellets.
4. The feed impurity-removing permanent magnet cylinder of the present utility model drives the fan device through the air pressure impact tube to make the material fully contact with the inner cylinder to ensure the magnetic separation effect.
5. The pulverizer adopts an isosceles trapezoidal table-like water drop-type pulverizing chamber to reduce the loss of feed moisture, and the sheet-shaped paddle increases the contact area between the paddle and the material, which can drive more material movement during the rotation process, so Has higher mixing efficiency.