1 ton feed mixer refers to a feed mixer whose output can reach one ton, is a necessary equipment in feed processing. The materials to be pulverized, such as corn, are sent to the pulverizer by the Feed screw conveyor. After pulverization, the fan is sent to the upper feeding port of the mixer through the pipeline and falls into the machine. After the pulverization is completed, turn on the mixer, add the remaining materials to be added through the feed port below the mixer, and lift the pulverized corn flour and other materials to the upper part of the mixer through the lifting screw in the mixer, and then use the centrifugal force of the screw shaft to evenly distribute the materials. Spread and mix. This cycle is repeated to achieve the purpose of stirring. At present, for farmers and small feed mills, there is an urgent need for a device with simple operation, high production efficiency, low energy consumption and low cost.
The difference between the two 1 ton feed mixers:
1.The 1 ton feed mixer consists of a mixing chamber, a screw shaft, a discharge port and a transmission part. The screw shaft is composed of single-head belt type inner and outer helical blades and main shaft with different rotation directions. It is located in the center of the mixing chamber. The shaft is equipped with inner and outer ring belt type spirals. The materials respectively enter the mixing chamber from the upper port of the machine cover. The screw shaft is driven by the oscillating pinwheel gear motor. When the screw shaft rotates, the material is flipped. At the same time, the right-handed blade pushes the material to one end along the inner ring, and the left-handed blade pushes the material to the other end along the outer ring. and shearing to achieve uniform mixing of materials.
2.A 1 ton feed mixer includes a mixing box, a mixing device and a support frame, the mixing box is welded on the support frame, and a mixing device is arranged in the mixing box. The mixing box includes a box body, a box cover, a bearing sleeve and a bearing fixing plate, and is characterized in that: a circular hole is arranged on one side of the box body, and a fan is arranged on the circular hole to facilitate taking out or replacing the rotating shaft. Install the door. A bearing fixing plate is welded on the outer side of the installation door, and a bearing sleeve is arranged at the center of the bearing fixing plate. The beneficial effects of the utility model are as follows: the installation door and the box are connected by bolts, which is convenient for installation and disassembly, and when the rotating shaft is damaged, the rotating shaft can be quickly taken out or replaced, which saves maintenance time, reduces the labor intensity of maintenance personnel, and reduces the need for maintenance. Damage to the box.
1 ton feed mixer rotor structure:
The rotor of the 1 ton feed mixer is composed of a main shaft, a support rod, and a spiral blade, and the support rod is welded on the main shaft at equal distances. And the width of the outer helical blade is 30mm. The rotor of the horizontal feed mixer is low in manufacturing cost, light in weight, the work load of the feed mixer is reduced, the supporting power is reduced, the inner and outer blades of the rotor are evenly fed, and the feed at the left and right ends of the feed mixer has no dead angle in mixing, which ensures the uniformity of feed mixing, and also enhances the Spiral blade strength.
Features of 1 ton feed mixer:
1. It is used to mix various grain powders to make nutritious feed pellets, especially suitable for chicken, duck and other feed pellets.
2. The feed ribbon mixer has the characteristics of high efficiency, stable operation and small footprint, and is the best choice for small feed pellet plants.
3. The optimized two-way ribbon stirring makes the mixing effect fully and evenly, CV<7%.
4. The mixing time of each batch of materials is short. 500-4000kg feed powder for 3-6 minutes.
5. Large door design, fast discharge, and less slag.
6. Equipped with several nozzles, liquid can be added for mixing.
7. The transmission is stable and the wear is low. Three materials are available: stainless steel, carbon steel and composite.
8. The mixing effect is not affected by material fitness and density. Ribbon mixers are also suitable for viscous materials.